Instrumental Cluster Screen Protector for Benelli TNT 150i, 251S

Installation:

1. Prepare a bowl of water + 6-7 drops of water mixed with detergent. It is better to touch the liquid with your hands and make it smooth. (The purpose of the water sticking method is to lubricate the instrument panel, so as to prevent the film from being scrapped due to the wrong sticking position that cannot be adjusted)
2. Clean the dashboard with alcohol cotton.
3. Apply the instrument film, tear off the No.1 protective film, spray a little water on the surface contacting the instrument panel film.
4. Sprinkle or spray a little water on the instrument panel and then stick the instrument film directly on the instrument panel. Adjust the position on the instrument panel gently with your fingers after pasting because there is a liquid that is very slippery.  It can be moved a little bit. Remember not to exert great force.
5. Use the scrapper to drive out all the water and bubbles in the contact surface between the film and the instrument panel. When scrapping bubbles and water, a paper towel can be used to suck out the water. 

Note: When sticking to the arc meter, you need to scrap bubbles patiently.

In order to paste the instrument film more easily, our film will be slightly smaller than the instrument panel, so that the position of the instrument film can be adjusted easily.

The instrument film itself can be successfully pasted after we have actually pasted it. We need to apply a little patience according to our method.